Add small amount of additional smoothing

This commit is contained in:
Jan Hamal Dvořák 2024-06-07 21:32:39 +02:00
parent 9648c344bf
commit 3cf5214bb8

View file

@ -37,7 +37,8 @@
static uint32_t lo_cos[LO_WORDS] __attribute__((__aligned__(1 << LO_BITS_DEPTH)));
static uint32_t lo_sin[LO_WORDS] __attribute__((__aligned__(1 << LO_BITS_DEPTH)));
#define RX_STRIDE (2 * IQ_SAMPLES)
#define DECIMATE 2
#define RX_STRIDE (2 * IQ_SAMPLES * DECIMATE)
#define RX_BITS_DEPTH 12
#define RX_WORDS (1 << (RX_BITS_DEPTH - 2))
@ -318,7 +319,7 @@ static void rf_rx_start(int rx_pin, int bias_pin)
false);
/* Pacing timer for the sampling script trigger channel. */
dma_timer_set_fraction(dma_t_samp, 1, CLK_SYS_HZ / sample_rate);
dma_timer_set_fraction(dma_t_samp, 1, CLK_SYS_HZ / (sample_rate * DECIMATE));
/* Sampling trigger channel. */
dma_conf = dma_channel_get_default_config(dma_ch_samp_trig);
@ -429,6 +430,7 @@ static void rf_rx(void)
unsigned pos = 0;
int64_t dcI = 0, dcQ = 0;
int prevI = 0, prevQ = 0;
while (true) {
if (multicore_fifo_rvalid()) {
@ -478,8 +480,14 @@ static void rf_rx(void)
for (int i = 0; i < IQ_SAMPLES; i++) {
uint32_t cos_neg = *cos_ptr++;
uint32_t cos_pos = *cos_ptr++;
int I32 = cos_neg - cos_pos;
int64_t I = I32;
int I1 = cos_neg - cos_pos;
cos_neg = *cos_ptr++;
cos_pos = *cos_ptr++;
int I2 = cos_neg - cos_pos;
int64_t I = (prevI + I1 + I1 + I2) / 2;
prevI = I2;
int64_t I16 = I << 16;
dcI = ((dcI << 16) - dcI + I16) >> 16;
@ -497,8 +505,14 @@ static void rf_rx(void)
uint32_t sin_neg = *sin_ptr++;
uint32_t sin_pos = *sin_ptr++;
int Q32 = sin_neg - sin_pos;
int64_t Q = Q32;
int Q1 = sin_neg - sin_pos;
sin_neg = *sin_ptr++;
sin_pos = *sin_ptr++;
int Q2 = sin_neg - sin_pos;
int64_t Q = (prevQ + Q1 + Q1 + Q2) / 2;
prevQ = Q2;
int64_t Q16 = Q << 16;
dcQ = ((dcQ << 16) - dcQ + Q16) >> 16;
@ -527,7 +541,7 @@ static void run_command(uint8_t cmd, uint32_t arg)
} else if (0x02 == cmd) {
/* Set the rate at which IQ sample pairs are sent */
sample_rate = arg;
dma_timer_set_fraction(dma_t_samp, 1, CLK_SYS_HZ / sample_rate);
dma_timer_set_fraction(dma_t_samp, 1, CLK_SYS_HZ / (sample_rate * DECIMATE));
} else if (0x04 == cmd) {
/* Set the tuner gain level */
gain = INIT_GAIN * powf(10.0f, 0.01f * arg);