No description
Find a file
2024-08-04 21:31:46 +02:00
grc Convert to QSD 2024-08-04 21:31:46 +02:00
sim Add TX simulation 2024-02-25 13:29:17 +01:00
src Convert to QSD 2024-08-04 21:31:46 +02:00
tools Experiment with a superhet approach 2024-07-16 11:03:22 +02:00
util Convert to QSD 2024-08-04 21:31:46 +02:00
.gitignore Experiment with a superhet approach 2024-07-16 11:03:22 +02:00
.gitmodules Initial import 2024-01-14 20:16:54 +01:00
circuit.svg Tweak circuit color 2024-06-05 14:32:20 +02:00
LICENSE Unlicense 2024-06-04 16:43:11 +02:00
README.md Lower the FB resistor value 2024-07-22 20:37:13 +02:00

Pico SDR

Using RP2040 / Raspberry Pi Pico as a software-defined radio receiver.

See the blog post for more information. Older code the article is mostly referring to can be found in the branch old and a more up-to-date approach in the branch master.

This branch contains code to use RP2040 and some passives as a superheterodyne receiver. It is still very much work in progress.

Circuit

Please refer to the simulation.

Software

  1. Clone using git clone --recursive as this package is using a custom USB stdio library for better throughput and to avoid deadlocks.

  2. Build and flash the firmware as usual:

    export PICO_SDK_PATH=/path/to/pico-sdk
    cmake -B build src
    cmake --build build
    picotool load -f build/pico_sdr.uf2
    
  3. Start the USB serial to TCP bridge:

    python util/bridge.py
    

    You need to have PySerial and Click packages installed.

  4. Open grc/PicoSDR-WBFM.grc in GNU Radio Companion, adjust carrier frequency to match your favorite FM radio station and press F6.

  5. Alternatively gqrx works fine with rtl_tcp input mode. Maximum sample rate seem to be 400 ksps, above that the samples are dropped. Make sure to set LNA gain to 0, gain control is digital and does not provide any benefits unless you lower your sampling rate significantly.