Commit graph

164 commits

Author SHA1 Message Date
71543c70da Increase decimation, remove filter 2024-07-31 22:54:59 +02:00
2068d3a01f Improve bit counting 2024-07-31 20:53:05 +02:00
0db366b602 Track vendor/pico-stdio-usb-simple 2024-07-30 21:01:09 +02:00
f5fb02c190 Avoid sleeps to prevent low-frequency artifacts
Replace them with busy looks that do not lower the current draw.
It still prevent memory saturation as the loops do not touch memory.
2024-07-27 15:43:32 +02:00
24d6acdb53 Improve LO synthesis precision to 17.9 Hz 2024-07-27 15:43:28 +02:00
f7d2dd3629 Limit LO drive for less spurs 2024-07-26 21:37:15 +02:00
f294b09c98 Refactor sample processing 2024-07-23 21:51:48 +02:00
178ba7bee0 Clear DMA chaining before abort 2024-07-23 20:30:54 +02:00
63ca3c6439 Improve the FIR filter a bit 2024-07-23 20:29:52 +02:00
884d84bbf9 Fix gain 2024-07-23 20:15:43 +02:00
5a9a0f7acc Move gain application to limit clipping 2024-07-22 20:39:40 +02:00
b52f772845 Increase queue length to avoid dropping 2024-07-22 20:37:13 +02:00
8974b812f2 Prevent too tight loop on the 1st core 2024-07-22 20:37:13 +02:00
3054904768 Lower the FB resistor value 2024-07-22 20:37:13 +02:00
821cd9189d Move feedback pin farther to prevent crosstalk
Now this was just silly of me.
2024-07-22 20:37:13 +02:00
9997b63c7e Update README 2024-07-22 20:37:13 +02:00
518d6f55db Fix gain 2024-07-22 20:37:13 +02:00
4e6a29abbc Replace BPF with LPF after I/Q conversion 2024-07-18 12:15:43 +02:00
09b4c2c169 Use a more stable bias 2024-07-17 22:20:45 +02:00
34a4df9b1a Use slightly harder bias to avoid clipping 2024-07-17 20:29:35 +02:00
dd66571945 Sample at full speed 2024-07-17 20:25:50 +02:00
bc96b5a9ee Implement a fast band-pass filter for better SNR 2024-07-17 20:04:45 +02:00
0e1fc91279 Remove LO dithering for better SNR 2024-07-17 18:58:28 +02:00
eaad670abb Adjust FB slew rate for better SNR 2024-07-17 11:43:30 +02:00
574c474c6e Reduce jitter and use HPF to improve SNR 2024-07-16 19:24:16 +02:00
38b7ec34f6 Experiment with a superhet approach 2024-07-16 11:03:22 +02:00
46c061f177 Use LNA gain options to control bias strength 2024-07-10 22:35:49 +02:00
c188d809df Randomize bias delay to reduce artifacts 2024-07-10 20:32:47 +02:00
57e36203aa Tweak LO dithering for better performance 2024-07-10 10:21:04 +02:00
2fc01539f0 grc: fix data workflow 2024-07-10 10:20:28 +02:00
8a9a927c8b grc: remove WBFM gain 2024-07-10 10:13:45 +02:00
1c3ec5cb49 Allow more precise tuning 2024-07-10 10:10:29 +02:00
12c53377f6 Use shorter queue to decrease latency 2024-07-10 10:10:13 +02:00
56aff439f7 Dither LO phase to reduce artifacts 2024-07-09 20:46:17 +02:00
ff6001b0da Fix DC offset error 2024-07-02 22:29:34 +02:00
cb47fd3aa5 Optimize frequency shift 2024-07-02 13:00:14 +02:00
e694692a8c Add missing cast 2024-07-02 12:13:54 +02:00
a88ff12555 Remove DC offset filter
Since we are off-tuning, we no longer need it.
2024-07-02 01:57:20 +02:00
6e70ef1433 Implement fixed off-tuning 2024-07-02 01:56:26 +02:00
7f98ab98f0 bridge: make device path a parameter 2024-06-25 18:10:06 +02:00
46aee7f5d2 Fix circular buffer reading 2024-06-15 18:52:50 +02:00
de9dc0e6fd Prevent dma hangup after ~7 days 2024-06-15 13:11:51 +02:00
2693c18fdc Refactor rx_lo_init 2024-06-15 12:49:03 +02:00
25c1e608e3 Avoid PIO input_sync_bypass 2024-06-11 23:04:16 +02:00
71c8ceb8bb Make bias strength settable 2024-06-09 13:05:52 +02:00
dd7d954733 Tweak bias 2024-06-09 00:16:17 +02:00
8c168d7461 Avoid copying queue buffers 2024-06-08 20:57:41 +02:00
3fa96ca7e3 Avoid getting stuck on many commands 2024-06-08 11:59:14 +02:00
421d298c86 Adjust gain factor 2024-06-07 21:33:16 +02:00
3cf5214bb8 Add small amount of additional smoothing 2024-06-07 21:33:06 +02:00